Digital depth caliper 300 mm IP67 protection | DIN 862
€113.40
Available, delivery time: 1-3 workdays
Product information "Digital depth caliper 300 mm IP67 protection | DIN 862 "
Digital depth caliper 300 mm IP67 protection
- - accuracy according to DIN 862
- - IP67 protection | water and dust resistant
- - stainless steel, hardened
- - finely ground and lapped depth base
- - buttons: INC, MODE, HOLD and POWER/0
- - deliver with inspection report
- - in plastic box
Technical Data
| Messbereich
Range |
Ablesung Reading |
Brückenlänge Length of Base |
Genauigkeit Accuracy |
L mm |
a mm |
h mm |
| 300 mm / 12" | 0,01 mm / 0,0005" | 150 mm | 0,04 mm | 390 | 150 | 13,5 |
Product Safety Information:
- Suitable only for technically skilled users familiar with the product and for craftsmen.
- Intended solely for the designated purpose.
- Improper use may lead to damage and injuries.
Importer/Manufacturer:
Gedema GmbH
Berchumer Str. 74
58093 Hagen
Email: info@messwelt.com
Email: info@gedema.com
Items explicitly stating the manufacturer are excluded.
Similar products
Digital depth caliper 150 mm IP67 protection- accuracy according to DIN 862- IP67 protection | water and dust resistant- stainless steel, hardened- finely ground and lapped depth base- buttons: INC, MODE, HOLD and POWER/0- deliver with inspection report- in plastic box
Digital depth caliper 0 - 150 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with pin, used for small depth measurement- finely ground and lapped depth base- buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper 0 - 200 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with pin, used for small depth measurement- finely ground and lapped depth base- buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Depth caliper analog 0 - 150 mm range- accuracy according to DIN 862- stainless steel, hardened - scale and nonius satin chrome finished - deliver with inspection report- in plastic box
Depth caliper analog 0 - 200 mm range- accuracy according to DIN 862- stainless steel, hardened - scale and nonius satin chrome finished - deliver with inspection report- in plastic box
Depth caliper analog 0 - 300 mm range- accuracy according to DIN 862- stainless steel, hardened - scale and nonius satin chrome finished - deliver with inspection report- in plastic box
Depth caliper analog 0 - 500 mm range- accuracy according to DIN 862- stainless steel, hardened - scale and nonius satin chrome finished - deliver with inspection report- in plastic box
Depth caliper analog 150 mm range with hook- accuracy according to DIN 862- stainless steel, hardened - scale and nonius satin chrome finished - double scales enable to use as normal depth gauge- deliver with inspection report- in plastic box
Depth caliper analog 300 mm range with hook- accuracy according to DIN 862- stainless steel, hardened - scale and nonius satin chrome finished - double scales enable to use as normal depth gauge- deliver with inspection report- in plastic box
Digital depth caliper 150 mm range- accuracy according to DIN 862- stainless steel, hardened - stop screw for the vernier- finely ground and lapped depth base- buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper 200 mm range- accuracy according to DIN 862- stainless steel, hardened - stop screw for the vernier- finely ground and lapped depth base- buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper 300 mm range- accuracy according to DIN 862- stainless steel, hardened - stop screw for the vernier- finely ground and lapped depth base- buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper with hook 150 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with hook, used for thickness measurement- finely ground and lapped depth base- stop screw for the vernier - buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper with hook 200 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with hook, used for thickness measurement- finely ground and lapped depth base- stop screw for the vernier - buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper with hook 300 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with hook, used for thickness measurement- finely ground and lapped depth base- stop screw for the vernier - buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper with double hook 150 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with double hook, used for thickness measurement- finely ground and lapped depth base- stop screw for the vernier - buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper with double hook 200 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with double hook, used for thickness measurement- finely ground and lapped depth base- stop screw for the vernier - buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper with double hook 300 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with double hook, used for thickness measurement- finely ground and lapped depth base- stop screw for the vernier - buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Depth caliper with double hook 150 mm range- accuracy according to DIN 862- stainless steel, hardened- scale and nonius satin chrome finished- measuring face with double hook - stop screw for the vernier - deliver with inspection report- in plastic box
Depth caliper with double hook 200 mm range- accuracy according to DIN 862- stainless steel, hardened- scale and nonius satin chrome finished- measuring face with double hook - stop screw for the vernier - deliver with inspection report- in plastic box
Depth caliper with double hook 300 mm range- accuracy according to DIN 862- stainless steel, hardened- scale and nonius satin chrome finished- measuring face with double hook - stop screw for the vernier - deliver with inspection report- in plastic box
Height measuring and marking device 150 mm range- made of stainless steel- satin chromed plated scale- with fine adjustment- with carbide scriber
Height measuring and marking device 200 mm range- made of stainless steel- satin chromed plated scale- with fine adjustment- with carbide scriber
Height measuring and marking device 300 mm range- accuracy according to DIN 862- made of stainless steel- with fine adjustment- carbide-tipped scriber- scale and nonius satin chrome finished- sturdy cast iron base, lacquered and lapped bottom working face- with inspection report- in plastic case
Height measuring and marking device 600 mm range- accuracy according to DIN 862- made of stainless steel- with fine adjustment- carbide-tipped scriber- scale and nonius satin chrome finished- sturdy cast iron base, lacquered and lapped bottom working face- with inspection report- in plastic case
Height measuring and marking device 300 mm range- accuracy according to DIN 862- made of stainless steel- with fine adjustment- carbide-tipped scriber- scale and nonius satin chrome finished- sturdy cast iron base, lacquered and lapped bottom working face- with inspection report- in plastic case
Height measuring and marking device 600 mm range- accuracy according to DIN 862- made of stainless steel- with fine adjustment- carbide-tipped scriber- scale and nonius satin chrome finished- sturdy cast iron base, lacquered and lapped bottom working face- with inspection report- in plastic case
Digital height and marking gauge 150 mm range- made of stainless steel- ON/OFF, ZERO, mm/inch- auto powered off- with fine adjustment- with carbide scriber
Digital height and marking gauge 200 mm range- made of stainless steel- ON/OFF, ZERO, mm/inch- auto powered off- with fine adjustment- with carbide scriber
Digital height and marking gauge 300 mm range- made of stainless steel- with fine adjustment- carbide-tipped scriber- with TOL, ON/OFF/PRE, HOLD, ZERO/ABS, mm/in, DIR buttons- powered by 3V battery- sturdy cast iron base, lacquered and lapped bottom working face- with inspection report- packed in plastic case
Digital height and marking gauge 600 mm range- made of stainless steel- with fine adjustment- carbide-tipped scriber- with TOL, ON/OFF/PRE, HOLD, ZERO/ABS, mm/in, DIR buttons- powered by 3V battery- sturdy cast iron base, lacquered and lapped bottom working face- with inspection report- packed in plastic case
Outside micrometer 0 - 25 mm range- accuracy according to DIN 863- with ratchet friction thimble- carbide measuring face- frame painted, scale chrome finished- with inspection certificate- in plastic box
Outside micrometer 25 - 50 mm range- accuracy according to DIN 863- with ratchet friction thimble- carbide measuring face- frame painted, scale chrome finished- including setting gauge- with inspection certificate- in plastic box
Outside micrometer 75 - 100 mm range- accuracy according to DIN 863- with ratchet friction thimble- carbide measuring face- frame painted, scale chrome finished- including setting gauge- with inspection certificate- in plastic box
Outside micrometer 50 - 75 mm range- accuracy according to DIN 863- with ratchet friction thimble- carbide measuring face- frame painted, scale chrome finished- including setting gauge- with inspection certificate- in plastic box
Outside micrometer 100 - 125 mm range- accuracy according to DIN 863- with ratchet friction thimble- carbide measuring face- frame painted, scale chrome finished- including setting gauge- with inspection certificate- in plastic box
Outside micrometer 125 - 150 mm range- accuracy according to DIN 863- with ratchet friction thimble- carbide measuring face- frame painted, scale chrome finished- including setting gauge- with inspection certificate- in plastic box
Outside micrometer set 0-100 mm range- accuracy according to DIN 863- 4-pcs. per set- with ratchet friction thimble- U-shaped frame with plate, painted frame- including setting gauges- with inspection report- in plastic box
Outside micrometer set 0-150 mm range- accuracy according to DIN 863- 6-pcs. per set- with ratchet friction thimble- U-shaped frame with plate, painted frame- including setting gauges- with inspection report- in aluminium box
Digital Outside micrometer 0-25 mm range- accuracy according to DIN 863- IP65 protection, water and dust resistant- painted frame. with ratchet friction thimble and thimble chrome finished- carbide measuring face- with ON/OFF, in/mm and ZERO buttons- data output with mini USB interface- with inspection report- in plastic box
Digital Outside micrometer 25-50 mm range- accuracy according to DIN 863- IP65 protection, water and dust resistant- painted frame. with ratchet friction thimble and thimble chrome finished- carbide measuring face- with ON/OFF, in/mm and ZERO buttons- including setting gauge- data output with mini USB interface- with inspection report- in plastic box
Digital Outside micrometer 50-75 mm range- accuracy according to DIN 863- IP65 protection, water and dust resistant- painted frame. with ratchet friction thimble and thimble chrome finished- carbide measuring face- with ON/OFF, in/mm and ZERO buttons- including setting gauge- data output with mini USB interface- with inspection report- in plastic box
Digital Outside micrometer 75-100 mm range- accuracy according to DIN 863- IP65 protection, water and dust resistant- painted frame. with ratchet friction thimble and thimble chrome finished- carbide measuring face- with ON/OFF, in/mm and ZERO buttons- including setting gauge- data output with mini USB interface- with inspection report- in plastic box
Internal micrometer 5 - 30 mm range- with round carbide measuring face- with ratchet friction thimble- thimble chrome finished- inclusive setting ring- with inspection certificate- in plastic box
Internal micrometer 25 - 50 mm range- with round carbide measuring face- with ratchet friction thimble- thimble chrome finished- inclusive setting ring- with inspection certificate- in plastic box
Internal micrometer 50 - 75 mm range- with round carbide measuring face- with ratchet friction thimble- thimble chrome finished- without setting ring- with inspection certificate- in plastic box
Internal micrometer 75 - 100 mm range- with round carbide measuring face- with ratchet friction thimble- thimble chrome finished- without setting ring- with inspection certificate- in plastic box
Three point internal micrometer set 6-12 mm- three piece internal micrometer set- for blind hole, satin chrome finished- inclusive setting rings and extension- with inspection certificate- in aluminium box
Three point internal micrometer set 12-20 mm- two piece internal micrometer set- for blinde hole, satin chrome finished- with carbide measuring points- inclusive setting rings and extension- with inspection certificate- in aluminium box
Three point internal micrometer set 20-50 mm- four piece internal micrometer set- for blind hole, satin chrome finished- with carbide measuring points- inclusive setting rings and extension- with inspection certificate- in aluminium box
Three point internal micrometer set 50-100 mm - four piece internal micrometer set- for blind hole, satin chrome finished- with carbide measuring points- inclusive setting rings and extension- with inspection certificate- in aluminium box
Digital depth caliper 0 - 300 mm range- accuracy according to DIN 862- stainless steel, hardened - measuring face with pin, used for small depth measurement- finely ground and lapped depth base- buttons: OFF/ON, ZERO, mm/inch- deliver with inspection report- in plastic box
Digital depth caliper 200 mm IP67 protection- accuracy according to DIN 862- IP67 protection | water and dust resistant- stainless steel, hardened- finely ground and lapped depth base- buttons: INC, MODE, HOLD and POWER/0- deliver with inspection report- in plastic box